清晰而宽广！
几十年来，音频工程师对人声使用了一定的处理技巧，以帮助单调乏味的单声道人声摆脱立体声扬声器。现在，您可以使用一个简单的插件来复制该秘密技术。人声分离器是一种便捷的一站式装置，可将单声道变成浓郁的现代立体声。当然，您也可以将此插件插入人声以外的音频中…

*从单一来源创建广泛而现代的人声
*一键转换的预设*速度和深度设置效果的力量
*驱动器拨盘添加粗砂并增加清晰度*静音源按钮，用于将效果用作发送

引擎盖下

如果愿意，可以略过此部分，但这是实际操作：Vocal Splitter结合了相移颤音效果（通过不对称地使声道失谐来拆分左右声道）和不对称整流。左右信号的角度（创建更好的立体声图像）。将这两种效果组合在一个插件中是一种创建有效的，具有最小相位的立体声分离人声信号的有效方法。

混合

中央混音拨盘可设置原始信号源和添加的立体声信号的干/湿比。如果您想以独奏方式收听添加的立体声信号，或使用效果总线上的插件，只需按“静音源”按钮，将源信号静音，这样您就只能听到Vocal Splitter处理过的音频。

速度与深度

这些拨盘协同工作，以控制将左右声道分开的相位偏移颤音效果的行为。通道不对称地失谐，并且这些转盘可以调节效果，以便您可以实现任何处理强度，从细微的增厚到全倍增。

驾驶

驱动功能使您可以控制左右信号的不对称整流的强度，从而创建更好的立体声效果。如果这听起来很技术性，请放心。您所需要知道的是，用力推动可提供类似饱和的效果，并将立体声图像带回到中央。
筛选器

高通和低通滤波器使您可以过滤添加的立体声信号，如果您希望将效果仅应用于特定的频率范围并避免在低端出现不必要的相位，则这一点尤其重要。

旁路

Vocal Splitter徽标充当整个插件的旁路控件，并且经过平滑处理后可以自由单击和弹出，以进行无阻碍的A / B测试。

W. A. Production是现实生活中的制作人，他们在制作创意插件，以帮助您快速轻松地实现工作室质量处理。请享用！

*从单一来源创建广泛而现代的人声
*一键转换的预设
*速度和深度设定效果的力量
*驱动器拨盘添加沙粒并增加清晰度
*静音源按钮，用于将效果用作发送

原文：

CLEAR AND WIDE!
For decades, audio engineers have used a certain processing trick on vocals to help lacklustre mono vocals leap from stereo speakers. Now you can replicate that secret technique with one simple plugin. Vocal Splitter is a handy one-stop unit for turning mono vocals into thick, modern-sounding stereo. Of course, you can also this plugin on audio other than vocals…

* Create wide and modern vocals from a mono source
* Presets for one-click transformations * Speed & Depth set the power of effect
* Drive dial to add grit and increase definition * Mute Source button for using effect as a send

Under The Hood

Feel free to skip this part if you like, but here’s what is going on under the hood: Vocal Splitter uses a combination of a phase-offset vibrato effect (that splits the left and right channel by asymmetrically detuning the channels) and an asymmetrical rectification of the left and right signal (creating a better defined stereo image). Combining these two effects in one plugin is an especially effective way to create a defined stereo split vocal signal with minimal phasing.

Mix

The central mix dial sets the dry / wet ratio of the original source signal and added stereo signal. If you want to listen to the added stereo signal in solo mode or use the plugin on an effects bus, just press the Mute Source button, muting the source signal so that you only hear Vocal Splitter’s processed audio.

Speed & Depth

These dials work together to control the behaviour of the phase-offset vibrato effect that splits the left and right channels. The channels are asymmetrically detuned and these dials adjust that effect so that you can achieve any intensity of processing, from subtle thickening to full-on doubling.

Drive

The drive feature lets you control the intensity of the asymmetrical rectification of the left and right signal, creating a better defined stereo image. If that sounds technical, don’t worry. All you need to know is that pushed hard it provides a saturation-like effect and brings the stereo image back in towards the centre.
Filters

The high pass and low pass filters allow you to filter the added stereo signal, especially important if you want the effect to only apply to a specific frequency range and avoid unwanted phasing in the low end.

Bypass

The Vocal Splitter logo acts as a bypass control for the whole plugin, and is smoothed to be click and pop free for unhindered A/B testing.

W. A. Production are real-life producers making creative plugins to help you achieve studio quality processing quickly and easily. Enjoy!

* Create wide and modern vocals from a mono source
* Presets for one-click transformations
* Speed & Depth set the power of effect
* Drive dial to add grit and increase definition
* Mute Source button for using effect as a send